GRANDSTREAM GS-POE60W-MG 60W POE INJECTOR IEEE 802.3AF/AT/BT 10G GIGABIT RJ45 LAN IN/OUT PLUG & PLAY

Overview

Deliver reliable power and high-speed connectivity to your network devices with the Grandstream GS-POE60W-MG, a 60W Power over Ethernet injector built for modern PoE deployments. Supporting IEEE 802.3af, 802.3at, and 802.3bt standards with dual 10Gbps RJ45 ports, it lets you send both data and power over a single Ethernet cable, without any software configuration required.

Quick Specs

• Type: Power over Ethernet (PoE) Injector
• PoE Standards: IEEE 802.3af / 802.3at / 802.3bt
• PoE Output Power: Up to 60W
• Ports: Dual 10Gbps RJ45 (LAN IN & LAN OUT with PoE)
• Power Input: 100–240VAC, 50/60Hz
• Power Output: 54VDC
• Installation: Plug & Play, no configuration needed
• Status Indicators: LED for power and PoE load
• Ideal For: Access points, IP phones, network cameras, and other PoE devices

Why Buy

• Simplified cabling: Power and data travel over a single Ethernet cable, reducing clutter.
• High-speed networking: Dual 10Gbps ports support fast, high-bandwidth connections.
• Broad compatibility: IEEE 802.3af/at/bt support works with a wide range of PoE-powered devices.
• Zero configuration: Plug-and-play design gets you up and running immediately.
• Clear status monitoring: LED indicators show power and PoE load at a glance.
• Flexible placement: Power devices in locations without a nearby electrical outlet.

Insights

Powering network devices in hard-to-reach locations, such as ceiling-mounted access points or outdoor cameras, often means running electrical wiring alongside network cabling. A PoE injector like the GS-POE60W-MG removes that requirement by delivering both power and data through the Ethernet cable already in place, simplifying installation and reducing cabling costs.

With support for IEEE 802.3af, 802.3at, and 802.3bt, the GS-POE60W-MG can supply enough power for demanding PoE devices, including high-performance Wi-Fi access points, making it a practical addition to growing or upgrading network deployments.

Key Features

60W PoE Output

Delivers up to 60W of power, supporting a wide range of compatible PoE-powered devices.

IEEE 802.3af/at/bt Support

Compatible with 802.3af, 802.3at, and 802.3bt standards, covering standard, high-power, and ultra-high-power PoE devices.

Dual 10Gbps RJ45 Ports

One LAN IN port connects to your switch or router, while the LAN OUT port delivers power and data to your PoE device, both running at up to 10Gbps.

Plug & Play Installation

No software or configuration is required. Simply connect the cables and the injector is ready to use.

LED Status Indicators

Built-in LEDs clearly display power status and PoE load, making it easy to confirm the injector is working correctly.

Wide Power Input Range

Operates on a 100–240VAC, 50/60Hz input, providing a stable 54VDC output for connected devices.

Use Cases

• Wireless Access Points: Power Wi-Fi access points installed on ceilings or walls without a nearby outlet.
• IP Telephony: Supply power to IP phones alongside network connectivity.
• Network Cameras: Power PoE-enabled security cameras in locations without local electrical wiring.
• Network Upgrades: Add PoE capability to existing switches or routers that don’t natively support it.
• High-Speed Deployments: Support 10Gbps connections where both speed and power delivery are required.

Is It Right?

This PoE injector is a great choice if you:

• Need to power a PoE device without running new electrical wiring.
• Require high-speed 10Gbps connectivity alongside power delivery.
• Want a simple plug-and-play solution with no configuration.
• Are deploying access points, IP phones, or network cameras.
• Have a switch or router that doesn’t support PoE natively.

You may want to consider another option if you:

• Need to power multiple PoE devices from a single unit.
• Require a managed PoE switch with per-port configuration.
• Need PoE ports built directly into your network switch.

Specifications

FAQs